HIL Read Buffer Example

This example reads 20 samples from analog input channels 0 and 1, and encoder channels 0 and 1, at a sampling rate of 1kHz.

System Requirements

This example requires hardware supported by the HIL command set, such as the Q4 or Q8 hardware-in-the-loop card. Furthermore, the card must support buffered reads from an analog channel.

Configuring the example

To set up the example for your data acquisition card, edit the M-file and change the board_type to the type of board being used. If you have more than one of these data acquisition cards in your machine, then also change the board_identifier variable to refer to desire board. Board identifiers are typically equal to the board number, with the first board being board '0', the next board being board '1', etc.

Running the example

Simply type the name of the example, hil_read_buffer_example, at the Matlab command prompt to run the example. It will read 20 samples from analog input channels 0-1 and encoder input channels 0-1 at 1 kHz and print the results to the Matlab command window. Typical output looks like:

            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.006104    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.008545    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.008545    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0
            ADC #0: 0.007324    ADC #1: 0.007324    ENC #0:     0    ENC #1:     0

Building code from the example

To build real-time code from the example for the QUARC Win64 target, execute the following command in the MATLAB Command Window:

qc_build_script('hil_read_buffer_example', 'win64');

The command may also be entered in this form:

qc_build_script('hil_read_buffer_example.rt-win64');

The qc_build_script command generates a build script called 'hil_read_buffer_example_build.m' and a main C file called 'hil_read_buffer_example_main.c'. It then invokes the build script to generate C code for the MATLAB script and to compile and link it into a QUARC executable called 'hil_read_buffer_example.rt-win64'. Running qc_build_script again will not overwrite the generated files, so they may be modified and the changes will be incorporated when qc_build_script is run again.

Running the generated executable

Before running the generated executable, open a QUARC Console so that the output of the executable may be seen. The QUARC Console need only be opened once. Use the command:

qc_script_console('hil_read_buffer_example.rt-win64', 'all');

The QUARC Console shows the standard output from any QUARC executable that is run on the target (since the 'all' option was specified).

To run the generated executable, type the following command in the MATLAB Command Window:

qc_run_script('hil_read_buffer_example.rt-win64');

The output from the executable will be seen in the QUARC Console:

QUARC Console output