Haptic 3-DOF Pantograph Emergency Stop
Monitors the Haptic 3-DOF Pantograph emergency stop button.
Library
QUARC Targets/Devices/Quanser/Haptics/Pantographs/Haptic 3-DOF Planar Pantograph/Interfacing
Description
The Haptic 3-DOF Pantograph Emergency Stop block monitors the emergency stop button of the Quanser Haptic 3-DOF Pantograph. The input is a scalar read from the digital line connected to the emergency stop circuitry. Use one of the HIL blocks to read these digital lines. The output of the block is a scalar which indicates whether the emergency stop is engaged (1) or not (0).
For the Quanser Q4 and Q8 cards, digital input channel 14 is typically used to read the status of the emergency stop circuitry of the Quanser Haptic 3-DOF Pantograph.
Input Ports
dig
This signal must be a scalar read from the digital lines connected to the emergency stop circuitry of the Haptic 3-DOF Pantograph.
Output Ports
stop
The status of the emergency stop button. The output is 1 if the emergency stop button is engaged i.e., the button is pushed and the amplifiers are disabled. Otherwise the output is 0.
Data Type Support
This block supports inputs and outputs of type double.
Parameters and Dialog Box
The Haptic 3-DOF Pantograph Emergency Stop block has no parameters.
Targets
|
Target Name |
Compatible* |
Model Referencing |
Comments |
|---|---|---|---|
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
||
|
Yes |
Yes |
Last fully supported in QUARC 2018. |
|
|
Rapid Simulation (RSIM) Target |
Yes |
Yes |
|
|
S-Function Target |
No |
N/A |
Old technology. Use model referencing instead. |
|
Normal simulation |
Yes |
Yes |
See Also
Copyright ©2024 Quanser Inc. This page was generated 2024-04-16. Submit feedback to Quanser about this page.
Link to this page.