Table of Contents
hil_set_encoder_quadrature_mode
The HIL API MATLAB functions have been deprecated in favour of the new quanser.hardware.hil class, which has support for code generation for Quanser targets. Hence, with the new hil class it is possible to run MATLAB scripts in real-time on Quanser targets, while making use of the Quanser hardware. |
Sets the quadrature modes of the specified encoder channels.
err = hil_set_encoder_quadrature_mode(board, channels, modes)
Configures the quadrature modes of the specified encoder channels. Valid modes are 0, 1, 2 or 4, for no quadrature, 1X, 2X or 4X quadrature respectively. In no quadrature mode the A and B channels are typically treated as count and direction.
If no err output is provided then it throws an exception if an error occurs. In generated code it prints the error message. Use hil_get_error_message to get the message associated with an error code.
board
The board handle returned by hil_open.
channels
A vector of channel numbers. Channel numbers are zero-based.
Select a board type from the list for board-specific details: .
modes
A vector specifying the quadrature modes. There must be one element for each channel in the channels vector. Each element must have a value of 0, 1, 2 or 4.
err
A negative error code or zero on success.
% Sets encoder channels 0, 3 and 5 to none, 4X and 2X quadrature respectively.
hil_set_encoder_quadrature_mode(board, [0 3 5], [0 4 2]);
See Also
Copyright ©2024 Quanser Inc. This page was generated 2024-10-17. Submit feedback to Quanser about this page.
Link to this page.