hil_write_pwm_buffer hil_write_other_buffer navigation bar

Table of Contents

hil_write_digital_buffer

Deprecated

The HIL API MATLAB functions have been deprecated in favour of the new quanser.hardware.hil class, which has support for code generation for Quanser targets. Hence, with the new hil class it is possible to run MATLAB scripts in real-time on Quanser targets, while making use of the Quanser hardware.

Writes the specified samples to the digital channels at the indicated sampling rate.

Syntax

[samples_written, err] = hil_write_digital_buffer(board, clock, frequency, channels, values)
    

Description

Writes the specified samples to the digital channels at the indicated sampling rate. The number of samples is determined by the number of columns in the values matrix.

Warning Many cards allow the digital I/O lines to be programmed as inputs or outputs. The digital I/O lines are configured as inputs or outputs using the hil_set_digital_directions function. All the channels which will be used as digital outputs must be configured as outputs using this function. Failure to configure the digital I/O may result in the hil_write_digital_buffer function failing to write those outputs.

If no err output is provided then it throws an exception if an error occurs. In generated code it prints the error message. Use hil_get_error_message to get the message associated with an error code.

Parameters

board

The board handle returned by hil_open.

clock

The clock to use as a timebase for the buffered operation. Hardware clocks are numbered incrementally starting at 0, with 0 meaning HARDWARE_CLOCK_0, 1 meaning HARDWARE_CLOCK_1, etc. The number of clocks available depends on the board selected. Refer to Clocks for more information.

Select a board type from the list for board-specific details: .

frequency

The sampling frequency in Hertz at which samples will be collected.

channels

A vector of channel numbers. Channel numbers are zero-based.

Select a board type from the list for board-specific details: .

values

A matrix of logical values. Valid values are 0 or 1. There must be one row for each channel and one column for each sample.

Outputs

samples_written

The number of samples written. This value will equal the number of samples specified unless the operation was canceled.

err

A negative error code or zero on success.

Examples

% Random logical values
values = (rand(2, 5000) >= 0.5);

% Writes 5000 samples to digital channels 0 and 3 at 1 kHz using SYSTEM_CLOCK_1
hil_write_digital_buffer(board, -1, 1000, [0 3], values);
    

See Also

 

navigation bar