Table of Contents
hil_write_other
Writes to other outputs immediately.
Description
The hil_write_other function writes to the specified other output channels immediately. The function does not return until the data has been written.
Prototype
t_error hil_write_other(t_card card, const t_uint32 other_channels[], t_uint32 num_channels, const t_double buffer[]);
Parameters
t_card card
A handle to the board, as returned by hil_open .
const t_uint32 [] other_channels
An array containing the channel numbers of the other outputs to be written.
Select a board type from the list for board-specific details: .
t_uint32 num_channels
The number of channels specified in the other_channels array.
const t_double [] buffer
An array containing the values to write to the other outputs. The array must contain num_channels elements. Each element in the buffer array corresponds to the same element in the other_channels array.
Return value
The return value is 0 if the other outputs are written successfully. Otherwise
a negative error code is returned. Error codes
are defined in quanser_errors.h
. A suitable error
message may be retrieved using
msg_get_error_message
.
Error codes
QERR_HIL_WRITE_OTHER_NOT_SUPPORTED
This function is not supported by the board-specific HIL driver for this board type.
QERR_INVALID_CARD_HANDLE
An invalid card handle was passed as an argument. Once a card has been closed using hil_close the card handle is invalid.
QERR_MISSING_OTHER_OUTPUTS
The other_channels argument is NULL. If the number of channels is greater than zero then a channel vector must be provided.
QERR_MISSING_OTHER_OUTPUT_BUFFER
The buffer argument is NULL. If the number of channels is greater than zero then a buffer must be provided.
QERR_TOO_MANY_OTHER_OUTPUT_CHANNELS
Too many other output channels were specified.
QERR_INVALID_OTHER_OUTPUT_CHANNEL
One of the other output channels that was specified is not a valid channel number. Channel numbers range from 0 to one less than the number of channels.
QERR_DRIVER_INCOMPATIBLE_WITH_BOARD_DLL
The board-specific HIL driver passed an invalid parameter to the operating system specific kernel-level driver for the board. The board-specific HIL driver is likely not compatible with the operating system specific kernel-level driver for the board. Make sure both are up-to-date and compatible versions.
QERR_INTERNAL_BUFFER_TOO_SMALL
The board-specific HIL driver used an internal buffer that was too small for the operating system specific kernel-level driver for the board. The board-specific HIL driver is likely not compatible with the operating system specific kernel-level driver for the board. Make sure both are up-to-date and compatible versions.
QERR_OUT_OF_REQUIRED_SYSTEM_RESOURCES
There are not enough system resources to perform the requested operation. Try rebooting, requesting fewer samples, or adding more memory to your machine.
Requirements
Include Files |
Libraries |
---|---|
hil.h |
hil.lib;quanser_runtime.lib;quanser_common.lib |
Examples
/* Write to the first two other output channels. */
t_uint32 channels[] = { 0, 1 };
t_double buffer[] = { 1.0, 0.0 };
t_error result = hil_write_other(board, channels, ARRAY_LENGTH(channels), buffer);
Copyright ©2024 Quanser Inc. This page was generated 2024-10-17. Submit feedback to Quanser about this page.
Link to this page.