Table of Contents
System Requirements
The system requirements differ for the Quanser Rapid Control Prototyping (RCP) Toolkit between the different RCP Targets. The Quanser RCP toolkit currently supports Windows or Mac machines as targets.
Host System
RCP Toolkit currently supports the following host systems:
Hardware Requirements
The host system must meet the following hardware requirements:
Software Requirements
The host system must meet the following software requirements:
(*)
Target Systems
The RCP Targets help page details the various targets currently supported by the RCP Toolkit.
Windows Targets
The RCP toolkit supports the following types of Windows targets:
As the RCP toolkit Windows Target uses the same machine as the RCP Windows Host, it shares the same hardware requirements as the Host System Hardware Requirements specified above.
Also, the only supplemental software requirement in addition to the Host System Software Requirements specified above is:
(*)
(e.g.,
NI-DAQmx,
NI Measurement & Automation Explorer
)
Mac Targets
The RCP toolkit supports the following types of Mac targets:
As the RCP toolkit Mac Target uses the same machine as the RCP Mac Host, it shares the same hardware requirements as the Host System Hardware Requirements specified above.
Also, the only supplemental software requirement in addition to the Host System Software Requirements specified above is:
(*)
(e.g.,
NI-DAQmx,
NI Measurement & Automation Explorer
)
(*) - The version of the module or feature on the target must correspond to the version of LabVIEW installed on the host.
Copyright © Quanser Inc. This page was generated 2021-09-24. Submit feedback to Quanser about this page.
Link to this page.