Table of Contents
Owning Palette: | Not available in this version of RCP Toolkit. Please check for updates. |
Requirements: | Quanser Rapid Control Prototyping Toolkit, LabVIEW 2020 or newer |
The Stream Poll VI polls for events associated with the stream. For example, it can be used to wait until data is ready to receive or until a client connection is pending. The Stream Poll VI waits for one of the selected events or the timeout to occur. If one or more events occur then it returns true at the corresponding output ports. If the timeout occurs then it returns false at all the event output ports and true at the timed out terminal. If an error occurs then it is reflected at the error out terminal. The operation of this VI is not affected by the blocking mode of the stream connected to its input.
stream in is a reference to the stream created by the Stream Connect, Stream Accept or Stream Listen VI.
If the stream is closed or is otherwise invalid then the negative error code |
timeout is the number of seconds to wait for an event to occur. If none of the selected events occur within the timeout period then the VI returns and the timed out terminal will be true. |
wait for data available to receive, enables the output, data is available to receive. This flag only guarantees that at least one byte is available in the stream buffer to receive. It does not guarantee that the Stream Receive will not VI unless it is only receiving a single byte. However, if messages are being sent over the stream it generally means that the entire message can be received almost immediately once the first byte arrives. |
wait for space available to send, enables the output, space available to send. This flag only guarantees that at least one byte is available in the stream buffer for sending. It does not guarantee that the Stream Send will not VI unless it is only sending a single byte. However, if messages are being sent over the stream it generally means that the entire message can be sent almost immediately once space for one byte becomes available. |
wait for space available to flush, enables the output, space available to flush. This flag only guarantees that at least one byte of the stream buffer can be flushed. It does not guarantee that the Stream Flush will not VI unless it is only flushing a single byte. |
wait for connection to complete, enables the output, connection completed. Note that this condition may not be distinguishable from the snd or fls conditions for some streams. Refer to the help for a particular protocol for details. |
wait for a client connection to be ready to accept, enables the output, connection accepted. This condition is only valid for listening streams. It guarantees that a Stream Accept VI will return immediately with a new client connection. Note that this condition may not be distinguishable from the rcv condition for some streams. Refer to the help for a particular protocol for details. |
error in describes error conditions occurring before the VI executes. If an error has already occurred, the VI returns the value of the error in cluster in error out.
|
stream out is a reference to the stream. This output is merely a copy of the stream in input. |
|||||||
timed out returns true if none of the selected events occur within the timeout period. |
|||||||
data is available to receive, a value indicating whether data is available to receive. This flag only guarantees that at least one byte is available in the stream buffer to receive.
It does not guarantee that the Stream Receive will not block unless it is only receiving a single byte. However, if messages are being sent over the stream it generally
means that the entire message can be received almost immediately once the first byte arrives. If |
|||||||
space available to send, a value indicating whether there is space in the stream buffer to store more data for transmission. This flag only guarantees that at
least one byte is available in the stream buffer for sending. It does not guarantee that the Stream Send will not block unless it is
only sending a single byte. However, if messages are being sent over the stream it generally means that the entire message can be sent almost
immediately once space for one byte becomes available.If |
|||||||
space available to flush, a value indicating whether the data in the stream buffer can be flushed to the underlying communication channel. This flag only guarantees that at
least one byte of the stream buffer can be flushed. It does not guarantee that the Stream Flush will not block unless it is only flushing a single byte.
If |
|||||||
connection completed, a value indicating whether a non-blocking Stream Connect has finished making the connection. Note that this condition may not be distinguishable
from the snd or fls conditions for some streams. Refer to the help for a particular protocol for details.If |
|||||||
connection accepted, a value indicating whether a client connection is pending on a listening stream. This condition is only valid for listening streams. It guarantees
that a Stream Accept VI will return immediately with a new client connection. Note that this condition may not be distinguishable from the rcv
condition for some streams. Refer to the help for a particular protocol for details.If |
|||||||
error out contains error information. If the error in cluster indicated an error, the error out cluster contains the same information. Otherwise, error out describes the error status of this VI.
|
All input/output pairs of this function have direct feedthrough behaviour.
RCP CL Comm Advanced Stream Example |
Target |
Supported |
Comments |
---|---|---|
Yes |
Fully supported. |
Copyright © Quanser Inc. This page was generated 2021-09-24. Submit feedback to Quanser about this page.
Link to this page.