HIL Set Encoder Counts (Vector)
| Parent Polymorphic VI: | HIL Set Encoder Counts |
| Requirements: | Quanser Rapid Control Prototyping Toolkit, LabVIEW 2020 or newer |
Description
Sets the values of the encoder counters.
Required Inputs 
All required inputs must be wired. They appear in bold text in the context help window for the VI.
|
board in is a reference to a HIL Board instance that represents the open HIL board. This input must be wired to a valid HIL Board signal, as generated by a HIL Initialize VI. |
Recommended Inputs
Recommended inputs need not be wired. They appear as simple text in the context help window for the VI.
|
channel is a channel number indicating the encoder input channel whose counter value is being set. |
|
count is the value to which the encoder counter is being set. |
Outputs
|
board out is a copy of the HIL Board instance passed to the board in input. |
Details
This method is useful for resetting the encoder counter to a known value during a calibration procedure.
Feedthrough Behaviour
All input/output pairs of this function have direct feedthrough behaviour.
Examples
There are currently no examples
Targets
|
Target |
Supported |
Comments |
|---|---|---|
|
Yes |
Fully supported. |
Copyright © Quanser Inc. This page was generated 2021-09-24. Submit feedback to Quanser about this page.
Link to this page.