HIL Write Digital (Vector)

Parent Polymorphic VI: HIL Write

Requirements: Quanser Rapid Control Prototyping Toolkit, LabVIEW 2020 or newer

Description

Writes to digital output channels of a HIL board.

Required Inputs All required inputs must be wired. They appear in bold text in the context help window for the VI.

board in is a reference to a HIL Board instance that represents the open HIL board. This input must be wired to a valid HIL Board signal, as generated by a HIL Initialize VI.

Recommended Inputs Recommended inputs need not be wired. They appear as simple text in the context help window for the VI.

digital channels is an array of channel numbers indicating the digital input channels to be written. The quantities written will appear at the digital states output.

digital states is the states written to the specified digital channels.

Outputs

board out is a copy of the HIL Board instance passed to the board in input.

Details

This VI only writes digital inputs. When writing from mixed signal types, it is more efficient to use the HIL Write Mixed than to include multiple VIs specific to each type of channel.

Feedthrough Behaviour

All input/output pairs of this function have direct feedthrough behaviour.

Examples

	RCP CL HIL Analog Loopback Example	This example is a simple analog loopback test, but it demonstrates a number of important features of RCP.
	RCP CL HIL Position Control Example	This example demonstrates how to use a PID controller to control Quanser's SRV02 experiment.

Targets

Target	Supported	Comments
RCP Windows (64-bit) Target	Yes	Fully supported.

navigation bar