Table of Contents >Quanser Rapid Control Prototyping Toolkit >Data Acquisition Card Support >
National Instruments Cards
This page shows which National Instruments data acquisition cards are supported by RCP and what HIL functions are available for each of those cards. The Read Mixed and Write Mixed functions are not supported by the National Instruments cards because reads and writes from multiple channel types simultaneously are not supported. You will get the best performance by using the specific functions.
All of these cards are supported via National Instruments' DAQmx API. DAQmx must be installed in order for RCP to utilize them, as described in RCP's System Requirements. The latest version of DAQmx can be downloaded from National Instruments' website www.ni.com. For additional information, please refer to the DAQmx Overview page. |
Config | Immediate I/O | Time Base I/O | Watchdog | ||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Initialize | Set Encoder Counts | Read Mixed | Read Analog | Read Digital | Read Encoder | Read Other | Write Mixed | Write Analog | Write Digital | Write PWM | Write Other | Read | Read Analog | Read Digital | Read Encoder | Read Other | Watchdog | Watchdog Clear | |
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
| ||||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
| ||||||||||
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
Copyright © Quanser Inc. This page was generated 2021-09-24. Submit feedback to Quanser about this page.
Link to this page.