Table of Contents >Quanser Rapid Control Prototyping Toolkit >VI and Function Reference >VIs - By Category >VI Categories >Hardware VIs and Functions >Control Loop VIs >Immediate I/O >CL HIL Read >

CL HIL Read Analog (Vector)

Parent Polymorphic VI:

CL HIL Read

Requirements:

Quanser Rapid Control Prototyping Toolkit, LabVIEW 2020 or newer, Control Design and Simulation Module

---

Description

---

Reads from analog input channels of a HIL board.

---

Required Inputs All required inputs must be wired. They always appear as terminals on the VI palette. They also appear in bold text in the context help window for the VI.

---

board in is a reference to a HIL Board instance that represents the open HIL board. This input must be wired to a valid HIL Board signal, as generated by a HIL Initialize VI.

---

Recommended Inputs or Dialog Box Options Recommended inputs need not to be wired. They may be selected to appear as terminals or dialog parameters, but show up as terminals by default. They appear in simple text in the context help window for the VI.

---

analog channels is an array of channel numbers indicating the analog input channels to be read. The voltages (or currents) read will appear at the analog voltages output.

---

Outputs

---

	board out is a copy of the HIL Board instance passed to the board in input.
	analog voltages is the analog voltages (or currents) read from the specified analog channels.

---

Details

---

This VI only reads analog inputs. When reading from mixed signal types, it is more efficient to use the CL HIL Read Mixed than to include multiple VIs specific to each type of channel.

---

Feedthrough Behaviour

---

All input/output pairs of this function have direct feedthrough behaviour.

---

Examples

---

	RCP CL HIL Analog Loopback Example	This example is a simple analog loopback test, but it demonstrates a number of important features of RCP.
	RCP CL HIL Position Control Example	This example demonstrates how to use a PID controller to control Quanser's SRV02 experiment.

---

See Also

---

	CL HIL Read Timebase	Reads from analog, digital, encoder and/or other channels of a HIL board while establishing the timing of the simulation loop via a hardware timebase.
	CL HIL Write	Writes to analog, digital, encoder and/or other channels of a HIL board.

---

Targets

Target	Supported	Comments
RCP Windows (64-bit) Target	Yes	Fully supported.

 

Copyright © Quanser Inc. This page was generated 2021-09-24. Submit feedback to Quanser about this page.

Link to this page.